0003;ECC fai;RDT Resultʧ, RDT;
0006;Can NOT get data/Read empty;RDT Resultʧ, δRDT;
000d;Can NOT get data/Read empty;RDT Resultʧ, δRDT;
0100;Flash calibrate fail;ָܲƵ;driving/Ƶ, ;
0101;block0-3 all bad;OWtimingʧ;z麸, QW;
0102;Flash calibration fail;_WODTʧ;z麸, QW;
0321;Read ID fail;Read ID fail;麸, QW;
0401;Block 0~3 fail;Block 0-3;;
0403;Un-enough static/dynamic SBlock area space;System^ĉK^;
0404;Un-enough SLC buffer;ҲblockĉK;
0406;Un-enough user area space;ʹ߅^ĉK^;
0500;Un-enough OP;, ԤOP;
0600;W/R test fail;дʧ;NAND/Nand;
0800;Read check SBlock fail;xblock 0ϵyYfail;ՈzW溸, Kԇһ, ՈQW;
0801;Read check DBT fail;xblock 0ϵyYfail;ՈzW溸, Kԇһ, ՈQW;
0802;Read check FW code fail;xblock 0ϵyYfail;ՈzW溸, Kԇһ, ՈQW;
0803;Read FW BlockInfo fail;xblock 0ϵyYfail;ՈzW溸, Kԇһ, ՈQW;
0804;Muti-plane W/R cache test fail;xyԇfail;z麸, QW;
0805;Erase block fail;;DDD;
0806;Remapping fail;xblock 0ϵyYfail;ՈzW溸, Kԇһ, ՈQW;
0900;Too large code size;
0B00;Cannot find Efuse setting;zConfig: FlashVesndoeNum;
0B01;Header setting is not match in Efuse and Config;Config: FLASH_TYPE and MAPPING_VALUE;
0B02;Code and flash vendor not match;zConfig: FlashVesndoeNum;
0B03;Driving setting fail;zConfig: drivingPλ;
0D00;Read RDT with ECC error;RDTϢ, ʧ;RDT;
0D01;Inherit fail;̳RDTwholes systemʧ;read RDT result,ʧ³RDT;
0D03;RDT result fail or No RDT result;̳RDTʧ, RDTʧ;
FF01;Read SBlock timeout;	
FF02;Get/Set feature fail;ȡ/ feature ʧ;NAND/Nand;
FF04;SRAM bit error;SRAM;zغ, 滻;
FF05;IC over temperature;خߜ;ՈzPCB, Q;
FF21;Read FW code timeout;
FF40;Erase without init;
FFFF;Wrong vendor command;
2001;FC command fifo full;
2040;FC command timeout;ָW]ؑ;溸, ;
202d;Unknown error;
